3DHealthStore - Super Pen Set

Health & Beauty

Categories

Cards We Accept

Coupon Zone

01.	test coupon

Home » Acupuncture » Electro Acupuncture »

Super Pen

List Price: ~~$74.60 USD~~
Our Price: $59.50 USD
You Save: 20% or $15.10 USD
US & Canada Shipping cost: $16.45 USD

Treatment Method for Low Resistance Points

Once a Low Resistance Point which is appropriatly fixed apply either one of the methods mentioned above. Hold and apply the Super Pen steadily onto this Point. Press down the Treatment Button 8 with your forefinger and start with the teeatment. At this time keep the sensoreelectrode and 9 fully and sreadily in touch with the epidermis area for treatment (Fig.5)
Keep pressing the treatment button 8, while the gree Indicator 6 and Buzzer will soon be switched off. Keep apply the Treatment Button 8 onto the epidermis. It is suggested that the teatment should keep for 15-20seconds( each Low resistance Point). By means of the electrode 9 micro pulse stimulating ensure that the treatment is being undertaken(Fig.5)
Intensity Control 2 can be moved to the minimal or maximal position to decrease of increase the feeling of pulse stimulating ensure that the treatment is being undertakern (Fig.5)
After treatment, move your finger away from the Treatment Button 8, Lift the Super Pen away from the epidermis. The red Indicator 5 will soon be turned on as indication of completion of treatment on Low Resistance Point (Fig.7)
Refer to the figure to further locate Low Resistance Point,and repeat the above mentioned procedure.
Difficulty in position fixing
The theory of the Super Pen sensor 9 is based on the test and comparison given to the electric resisitance on the epidsrmis of the human body. Due to various factors such electric resistance varied from person to person. The same person may different skin condition in one day. Consequently, difficulty may be encontered in position fixing when the Green Indicater Buzzer method is employed. Careful illustrations detailing typical skin condition withe suggestions for the process of locating a certain Low Resistance Point are set below.

Dry Skin: for excessively dry skin(such as being caused by central heating or dry weather), rub it with a wet cloth prior to locaing a certain low resistance point. Otherwise, the green indicator 6 may not be light on, and the buzzer may not sound.
Oil Skin: excessively oil skin should be eliminated from peripheral skin because it would be unable to effecticely fix the pisition and give treatment to the low resistance points. The skin condition is oftern experienced on facial areas.
Wet Skin: when locating a certain low electric resistance point, high moisture or sweating(such as being caused by humid temperature, after sporting or taking a bath) must be dried from the peripheral epidermis. Otherwise, the green Indicator 9 may be light on and the buzzer may keep ringing. Such a skin condition is usually reflected in the palm.

Therefore, generally speaking, the peripheral epidermis of a certain low resistance point should be cleaned to get rid of its excessive oil or moisture. The oil and moisture on the sensor/electrode and 9 of the Super Pen should be cleaned with a dry cloth after treatment. It is"Method" be used while difficulies are experienced with the "Green Indicator/Buzzer method"

Acu Pen Specification

Power Supply

DC 3V(2 X LR44 Batteries)

Frequency

0.25W

Environment

Temperature: 5~40°C
Humidity:35%~80%

Package Info

AcuPen with velour case
Use manual
2 x mercury batteries(portable)

Dimension
Weight

Acu Pen:138(L) x 23(W) x 10(H) m/m
Package: 215(L) x 50(W) x 30(H) m/m
Weight of Acu Pen:15+/-1gram.(including mercury batteries)
Weight of the whole unite 120g

This Acu Pen is use for search Acupuncture Point from body skin. Easy operate and portable for convene carry, can easily use any time and any place.

Before Use:

Insert battery with correct polarity into battery housing.
Press POWER / SENSITIVITY BUTTON 3 second to power on this device.
Click the POWER / SENSITIVITY BUTTON for sensitivity level setting
Keeping move the SENSOR around skin for searching acupuncture point location, the buzzer will sound and green LED will on while find out the acupuncture point, the buzzer sound frequency and ACU. POINT INDICATOR flash frequency will faster while closer to acupuncture point area or slower while away from acupuncture point area.
Keeping press PROWER / SENSITIVITY BUTTON 3 second for power off the divece.

After Use:

Remove the batteries from battery housing.
Clean the SENSOR head with little wet cloth.

Controls:

POWER / SENSITIVITY BUTTON:While this device in power off condition, keeping press this button 3 second for power on. While this device in work, keepping press this button for power off.
Acupuncture Point Percentage display: This LCD displayer will show Acupuncture Point Percentage reading from 1%~99%during searching the acu. point, While the buzzer in sounding and displayer reading over 90%. that means alreay ove 90% find out the acupuncture point.
Sensitivity Setting: Each click the POWER / SENSITIVITY BUTTON will change the sensitivity in I, II, III level. The most sensitivity level is III and lowest sensitivity level is I.
Llow Battery Display:While the low battery symbol in flash then need change new batteries.
Auto Power Off: This device will atuo power off after continue 2 minutes without any operate.

[<<Prev] 1 2 3

Available Options:
Model:

Current no reviews for this product

Write a new review >>

Advance Search

Shopping Cart

0 items

Your Account

Your Email Address

Your Password

Best Sellers

01.	Pointer Excel II
02.	Acupressure Device JT-05
03.	Magic Needle (QZT-8)
04.	Electroacupuncture Device - Pointer Plus
05.	Electro-Acupuncture GB1002

Information

Ordering Info
About Us
Pricing Policy
Privacy
Return Policy
What is ISO13488
Shipping Info
FAQ
Herbal Safety Guidelines
INFRARED JADE MATTRESS CONTROL PANEL
HOW TO USE THE SILVER MATTRESS
Links
Contact Us
Site Map
Vendor