3DHealthStore - Micro Current-400

Health & Beauty

Categories

Electromagnetic Device

Cards We Accept

Home » ElectroMagnetism » Electromagnetic Device »

Micro Current-400

List Price: ~~$249.00 USD~~
Our Price: $142.00 USD
You Save: 42% or $107.00 USD
US & Canada Shipping cost: $23.00 USD

Technical Specifications (+- 20% tolerance)
Channels:	Dual isolated between channels
Carrier Frequency	15000 Hz
Modulated Frequency	0.3Hz, 9.1Hz, 30Hz, 292Hz
Amperage Output Adjustable	0-8 ma
Wave Form	square or slope
Power Supply	9 volt Alkalide battery system
Size	27 x 62 x 95 mm
Weight	150g(including battery)
Package Info	TENS Pad 4pc/pk Batteryx 2 Lead Wire x 2 Manual x 1 Case x 1

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Indicators and Controls

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Micro 400 Tens Feature

This Micro 400 Tens unit is a battery powered multi frequency pulse generator. It sends electrical impulses through the skin using disposable conductive electrodes. The device has very few adjust ments which makes the Mirco 400 Tens very easy to use.
The main adjustments are current ( Labeled current on the front of the Micro 400 Tens)WAVE FORM and FREQUENCY. The current can be adjusted from 25 microapms to 8 millianosusing the knob labeled CURRENT on the top of the unit. Rotating the knob clockwise will in crease the current output. There are four frequenccies which are labeled. F1, F2, F3 and F4. The frequencies are adjusted by the knob labeled frequency to align the line on the knob with the frquency labeled on the face of the instrument.F1=0.3 Hz, F2=9.1 Hz, F3=30Hz, F4=292 Hz.

Turning the Tens ON and OFF

On the (Top) threr is a switched knob labeled ON. When the knob is rotated clockwise, the switch is in the ON postion, the indicator (Light) on the (TOP) of the Mirco 100 tens will come on and begin to flash. The Tens is On, When the knob is rotated fully counter-clockwise, the device will be OFF and the light will go OFF.

Current

The CURRENT is the amount of electricity which enters the patient's body. The ON/CURRENT knob on the top of micro 400 Tens controls the CURRENT.
It is labelled 1 thought 8. Turning the knob clockwise incereases the CURRENT.There are tow ranges for the CURRENT. These ranges are High which is 0 to 8 millimamps and is labeled MA and Low which is 0 to 900 ma microamps and is labeled µa.

Output Jacks

There are tow output jacks on the right side of the device.
The electrode jack provides the current for the treatment. It accepts the right angle sub-miniature plug which is connected to the electrode.When the frequency is 6HZ, the LEDS flash on for about 1/12 second and then off for about 1/12 second. At 10 cycles per second the flashing is much faster.
That speed is still visible to the eye and is obviously flashing. At the HIGH FREQUENCY settings of 30 and 292 Hz, the light is flashing very fast and appears to be a solid light because it is flashing too fast for the eye to discriminate the flashes.

1 2 [Next>>]

Current no reviews for this product

Write a new review >>

Advance Search

Shopping Cart

0 items

Your Account

Your Email Address

Your Password

Best Sellers

01.	Micro Current-400
02.	Electromagnetic Device YC-EO II
03.	Micro Current-300
04.	Electromagnetic Device YC-EO II B

Information

Ordering Info
About Us
Pricing Policy
Privacy
Return Policy
What is ISO13488
Shipping Info
FAQ
Herbal Safety Guidelines
INFRARED JADE MATTRESS CONTROL PANEL
HOW TO USE THE SILVER MATTRESS
Links
Contact Us
Site Map
Vendor