3DHealthStore - LCD Digital Multi-Channel EMS HT-338LN

Health & Beauty

Categories

Tens Electrode and Wire

TENS Unit

UltrasoundProfessional

Book and Medicine

Cards We Accept

Home » Medical and Health » EMS Unit » HT-338LN

LCD Digital Multi-Channel EMS
[HT-338LN]

List Price: ~~$225.00 USD~~
Our Price: $178.00 USD
You Save: 20% or $47.00 USD
US & Canada Shipping cost: $24.50 USD

How to use the EMS HT-338LN?

Push battery cover to open and place batteries into space. make sure the positive and negative poles are in the correct position. Or plug-in AC/DC adaptor.
Be sure one side of the cable is inserted in the output plug, and the other side is inserted in the electrode wire socket( each cable need inserted in two electrodes).
Choose area of skin and use water or alcohol to clean it, then paste the electrodes on the skin.
Turn on the power switch on the unit. Mode"A1" will be auto displayed as, timer 30 mins./on time 3 sec./rate 2 Hz/ off time 8 sec. / scan type " ■ "on time/ " ■ " rate/ " ■ " off time/scan level + - 25%. Turn the density knob to start operation for use directly.
When the unit is in operation, press the "scan type" to change scan modulation type, press the "M+ - % ↑ ", " M + - % " to choose scan modulation level (+ - %) and "timer" to choose operation time.
- The unit can automatically calculate the modulation value by pressing "Scan + - %". The Scan value will be displayed ont eh LCD screen (see the modulation value calculations and examples).
- The unit can automatically run the scan modulation type by press "Scan Type" The " ■ " for the "on time" / " rate "/"off time" have 7 different combination type (See the scan type table).
- If the scan value selected is "0", the unit stop the scan modulation type function.
The mode can be changed to another in operation by pressing the "mode" / "mode #"button twice or hold finger down. If only press the "mode" / "mode #" one time, it can not be changed to another mode and will auto return to the beginning mode that was being used after 3 second.
- You can choose modes "A~J" by pressing "mode"button. The "mode #" button can be used to choose setting "1-9". This gives you 90 different forms to choose from. They are all fully adjustable at anytime with "scan type" / "scan + - %" / "timer" button.
When the unit in operation the "mode"/"mode #" as been changed, the density level will be flashed and output stopped, you must turn the knobs back to "0" position. if the density knobs has not been turn backwards to "0" position, the buzzer will begin to remind beep until they are all on "0" position.
Turning the density knob up, the unit density will begin to raise and output, the LCD will display the density level bar on the screen.
When the unit is in operation, press the "timer" once each time or hold finger on timer to choose time. The time will change and restart count back, but the unit will still be in operation. The "Scan type" / "scan value" as been set are same of "timer".
- Timer can be changed from "5-60"mins. or "0"/"--:--" for continuous time, if the unit hasn't been programmed for more than 2 hours it will be auto save battery mode; but have been programmed, it will restart backward count again).
When timer has reached "00"min. The unit will auto stop operation. If in a period of 3 mins has not been in use, the unit will go to auto save battery mode. But the unit will remember the last setting, then press any switch to restart operation. See steps 3-6.
In order to turn off unit's power completely, first turn all density knobs backward to "0" position and next step turn the power switch off.
- When a function on screen in flashing, it is a reminder for the user to set in order to use.
- When the unit's at save battery mode, the LCD screen will be displayed flash.

[<<Prev] 1 2 3 [Next>>]

Current no reviews for this product

Write a new review >>

Advance Search

Shopping Cart

0 items

Your Account

Your Email Address

Your Password

Best Sellers

01.	EMS 7000 (TX-1311)
02.	LCD Digital EMSHT-326L4
03.	LCD Digital Multi-Channel EMS
04.	EMS 6500
05.	Prom-550 DIGITAL EMS UNIT

Information

Ordering Info
About Us
Privacy
Pricing Policy
Return Policy
What is ISO13488
Shipping Info
FAQ
Herbal Safety Guidelines
INFRARED JADE MATTRESS CONTROL PANEL
HOW TO USE THE SILVER MATTRESS
Links
Contact Us
Site Map
Vendor