3DHealthStore - Infrared EMT- Pillow ANP-23

Health & Beauty

Categories

Cards We Accept

Coupon Zone

01.	test coupon

Home » Infrared Energy » Infrared Heat Device » ANP-23

EMT Pillow ANP23
[ANP-23]

List Price: ~~$129.00 USD~~
Our Price: $87.50 USD
You Save: 32% or $41.50 USD
US & Canada Shipping cost: $14.50 USD

How to use your Infrared EM-Pillow?

Preparation before using
Two ways to supply power( it is suggested that you use adaptor as much as possible)
- Using adaptor for power supply
Opten the plastic cover at the back of the the Infrared Pillow, get out the hand - controller, connect the DV plug with the inner outlet while insert the AC plug into the AC power socket. Draw the down - lead from the side hole and close the back cover.
Then you can use it now.
- Using Nickel-Hydrogen rechargeable battery for poer supply

open the plastic vover at the back of the pillow, get out the hand controller, open the battery cover and then install 4 PCS of Nickel- Hydrogen rechargeable batteries according to the drawing on the back of the cover.
Inspect whether the battery are installed peoperly.
Turn the battery power switch to the position of "ON " as showed by the drawing. Press the " On/Off " key on the hand controller. If the screen flashes, it proves that the batteries are installed properly.
The battery should be charged for more than 2 hours by adaptor.
The battery switch should be turned to the position "Off " in case that the batteries are not used for a long time. In this position, it can be charged.

Battery charge:
In case that the adaptor is inserted into the AC power socket, the battery will be charged automatically even if the battery switch is "Off". The battery should be charged for more than 10 hours the first time it is used, When using the batteries to supply power, if the left down corner of the controller flashes the pattern of "

" accompanied by 5 beeps and then closed instantly, this means that the power of the batteries is not enough and the batteries can only be used until they are charged for more than 2 hours.

How to operate the Infrared Pillow controller
1. Turn on/off , change of functions
Turn on: Press the "on / off " button to turn on the instrument.
Turn off: Press the "on/off " botton continuously for more than 2 seconds and then release it.
Change of function:
The function will change every time when you press the " on / off " button
2.Working function ( choose only one every time)
The frame will stop at function "Auto" when you turn on the controller; Press "on/ off " key and you will choose any one of the four function " Auto ", " Mode " , " Heat ", "Mode"+" Heat ".

"Auto" Function

Press "ON/OFF" button and turn on the Infrared Pillow,, the frame will stay at "Auto" function and the screen will display"

" while you sense treatment. The digital figure at the middle of the screen will start contdown 15 minutes. the figure showing the intensity will flash"01".By press key "+", you can increase the output intensity to a proper degree. One minute later, a figure "

" will be shown on the screen which means that far infrared ray thermal moxibustion is going on . Later treatment and thermal moxibustion will work alternatively until the time ends.

"Mode" Function

When the frame stays at "Mode" function, the intensity figure will flash continuously.By pressing button "+" or "-", you can increase or decrease the intensity. If you press " Mode / Intensity " = " M / l "button at this function, the figure at left down corner will flash and you can choose 1-9 treatment mode by press button "+" or "-".

"Heat" Function

When the frame stays at " Heat " function it will start thermal therapy solely. The digital figure showing time on the screen will start countdown 15 minutes.
When the frame stays at both " Mode " and " Heat " functions, it will start treatment and thermal moxibustion at the same time and the intensity figure will flash continuously. Then you can shoose the intensity by pressing button " + " or " - ". In this status, press button "M/I", the figure at the left down corner will flash and you can press button "+ " or "-" to choose 1-9 pattern

[<<Prev] 1 2 3 [Next>>]

Current no reviews for this product

Write a new review >>

Advance Search

Shopping Cart

0 items

Your Account

Your Email Address

Your Password

Best Sellers

01.	Slimming Sauna Belt - ANP1D
02.	Slimming Sauna Belt - ANP56G
03.	Infrarex Bulb 110V
04.	Slimming Sauna Belt - ANP1DS
05.	Far Infrared Thermal Energy Bag PH-2B II

Information

Ordering Info
About Us
Pricing Policy
Privacy
Return Policy
What is ISO13488
Shipping Info
FAQ
Herbal Safety Guidelines
INFRARED JADE MATTRESS CONTROL PANEL
HOW TO USE THE SILVER MATTRESS
Links
Contact Us
Site Map
Vendor