Operation Method

1. For common cupping applicance
   For therapeutic treatment, refer to the pictures provided in the product description manual to identify the locations of key points on the body. The points located in the anterior midline (the conception vessel), and posterior midline (the governor vessel) of the body are solitary, while the points of the other meridians are symmetrically located. In the picture illustrations, the locations of the points are provided only on one side of the body or limbs, however, cupping treatment is usually done on bilateral sides. Before cupping, lift the piston in the top of the cup for ventilation. Following, insert the opening of the gun connector to the piston of the cup. Rapidly draw the lever of the gun 2-3 times until the skin protrudes, and the suction pressure is tolerable to the patient.
   At areas where cupping cannot be done directly on the skin by the patient herself, such as the spine and the lumbar region, the connecting tube may be used, i.e. insert the large end of the connecting tube into the nozzle, then connect the other end to the piston to the gun. This creates the link between the cup and the gun by means of the connecting tube. Following, place the cup onto the selected point for treatment. In the case where the area to be treated has loose skin or is exposed, a proper rubber ring for sealing, which is attached to the opening of the cup, can be used to provide extra comfort for the user. When applying cupping on a hairy area, sealing paste may be used before beginning treatment to increase the user's comfort. After using the sealing paste, there may be some residue left on the hair, which can be removed quickly and easily. After treatment, wrap the excess paste well to prevent it from drying up.
2. For breast enlargement cup
   The breast enlargement treatment utilizes the stimulation of muscles in the chest to promote blood circulation and sensory nerve transmissions to the brain, which activates pituitary gland secretion, which stimulates breast enlargement. By selecting a suitable sized breast enlargement cup, attach the rubber sealing cushion, and then link the cup and vacuum gun with the connecting tube. Place the cup slightly tilted upwards onto the breast for the convenience of preventing the nipple from reaching the top of the cup. Holding the cup which is on the breast in one hand, and using the other hand to pull the lever of the gun to withdraw the air inside the cup will cause negative pressure to build up inside, which may enlarge the breast some 2 cm. Disconnect the cup and the connecting tube, and gently lift the piston located on the top of the cup to let air into the cup. At the point where the pressure inside and outside the cup is equal, the cup would fall off the breast, and simultaneously, the breast will resume its normal size. Repeat this process for 15 minutes on each breast. Apply the treatment twice a day, once in the morning, and once in the evening. This will stimulate the muscles and improve blood circulation for enlarging the breast